Product Description
1, Mainstream models and features
SCALA2 series
Technical features: Equipped with a new generation of frequency conversion technology, it can automatically sense water demand and adjust motor speed to achieve constant pressure water supply throughout the house, with working noise below 45 decibels.
Applicable scenarios: Suitable for residential buildings such as villas, large flats, and apartments that require stable water pressure, supporting dual pressurization of hot and cold water.
Easy installation, significant boost effect, and intelligent start stop function reduce energy consumption.
CM3 series
Technical features: Anti freezing design, support constant voltage frequency conversion, low-noise operation (<50 decibels), can be matched with intelligent controller for remote adjustment.
Applicable scenarios: Suitable for high-rise buildings, multi bathroom households, or whole house pressurization needs, some models support self-priming function.
High cost-effectiveness, significant improvement in shower and kitchen water usage after pressurization, but slightly larger in size.
UPA series (such as UPA15-120, UPA160)
Technical features: Compact and compact, fully automatic induction water flow start, strong durability of cast iron pump body, superior noise control compared to similar products.
Applicable scenarios: For local pressurization needs such as water heaters and showerheads, suitable for small households or single water points.
2, Core technological advantages
Variable frequency constant voltage: Real time adjustment of motor power through intelligent chips to avoid water pressure fluctuations and extend equipment life.
Energy saving and environmental protection: Compared with traditional fixed frequency pumps, it saves 30% -50% energy, and some models have passed SBTi (Scientific Carbon Target) certification.
Silent design: adopting shielded motor and shock-absorbing structure, there is no disturbance to residents during nighttime use.
3, Purchase suggestions
High budget/large unit: Priority should be given to the SCALA2 series, which has comprehensive performance and supports intelligent control.
Cost effectiveness requirement: CM3-3/CM3-4 antifreeze models are suitable for whole house turbocharging and have a moderate price.
Partial pressurization: UPA90/UPA160 has a compact size and flexible installation, suitable for water heaters or single faucets.
Installation method guide for variable frequency booster pump
1, Installation steps
Preparation before installation
Check if there are any debris in the pump body and pipeline, ensure the pipeline is clean, and avoid blockage.
Choose the appropriate model based on the household water pressure requirements (such as prioritizing SCALA2 for large units and UPA series for local pressurization).
Installation location selection
Whole house pressurization: Prioritize installation on the inlet manifold to ensure that all water points are pressurized.
Local pressurization (such as a water heater): can be installed at the inlet of the cold water pipe and only activated when using hot water.
Ensure the stability of the pump body, avoid vibration or tilting, and operate the motor and control box according to the instructions.
Accessory installation and pipeline connection
Prioritize installing a pre filter to protect the booster pump, and then connect the booster pump pipeline.
Use variable diameter adapters (such as UPA120 requiring 6 branch adapters), pressure resistant metal pipes, and other compatible accessories.
Pay attention to the direction of water flow and use the "bottom in, top out" method to optimize the cooling effect; When installed horizontally, the control box should face upwards to prevent condensation from entering.
Electrical connection and debugging
Separate power sockets with grounding wires should be configured to avoid sharing circuits with other high-power devices.
After installation, exhaust should be carried out (the exhaust valve on the nameplate should not face directly up/down), and the water flow induction start function should be tested.
2, Key precautions
Pre filter installation: It must be completed before the installation of the water pump, otherwise it may affect the stability of the system.
Position of control box: When installing horizontally, it is necessary to ensure that the control box is located above the pump body to avoid condensation water from seeping in and causing malfunctions.
Motor direction: Some models (such as SCALA2) require the motor to face upwards and must be aligned strictly according to the arrow markings in the instruction manual.
Cooling and sealing: Regularly check the sealing of the cooling system to avoid equipment damage caused by water leakage or poor heat dissipation.
Testing and maintenance: Before the first start-up, it is necessary to check the sealing by idling, observe water pressure fluctuations during operation, and adjust the frequency conversion parameters in a timely manner.
3, Key points of model differentiation
SCALA2 series: suitable for large residential areas, requires intelligent controller to debug constant pressure parameters, and requires full house water pressure testing after installation.
UPA series: compact in size, can be installed for a single water point, but attention should be paid to the minimum activation threshold of the flow switch (≥ 2L/minute).
CM3 series: The anti freezing design is suitable for cold regions, and maintenance space needs to be reserved during installation.
Related models:
CM3-3 CM3-4 CM3-5 CM5-3 CM5-4 CM5-5 CM5-6 CM5-7 CM10-2 CM10-3 UPA 15-90 UPA 15-120 UPA 15-160 CR1-2 CR1-7 CR10-20 number96511844 PEA25-ALSSTFTF-B CRN15-1 CRN15-2 CRN15-3 CRN15-4 CRN15-5 CRN15-6 CRN15-8 CRN15-9 CRN15-10 CRN15-12 CRN15-14 CRN15-17
CR5-2 CR5-3 CR5-4 CR5-5 CR5-6 CR5-7 CR5-8 CR5-10 CR5-11 CR5-12 CR5-13 CR5-14 CR5-16 TP25-80/2 TP40-160/2 TP40-240/2 TP40-300/2 TP40-360/2 TP40-430/2 TP40-530/2 TP50-360/2
TP50-430/2 TP65-210/2 TP65-410/2 CR64-1-1 CR64-1 CR64-2-2 CR64-2-1 CR64-2 CR64-3-2 CR64-3-1 CR45-9-2 CR45-9 CR45-10-2 CR45-10 CR45-11-2 CR45-11 CR45-12-2 CR45-12 CRN1S-13 CRN1S-12 CRN1S-11 CRN1S-10 CRN1S-9 CRN1S-8 CRN1S-7 CRN1S-6 CRN1S-5 CRN1S-4 CRN1S-3 CRN1S-19 CRN1S-17 CR95-3-2 CR95-3 CR95-4 CR95-5 CR95-6 CR95-7 CR95-8-2
DPK.15.80.37.0 CRI1-3 CRI1-2 CRI1-4 CRI1-5 CRI1-6 CRI1-7 CRI1-33 CRI1-30 CR32-12 CR32-10
CR32-13 SPK4-19/19 NBG100-65-200/190 MTS20-30 R38 DQ-T PIPE MTS20-50
R38-DQ-T PIPE MTR3-7/3 A-W-A-HUUV MTR3-17/17 A-W-A-HUUV MTR3-19/11 A-M-A-HUUV
MTR3-19/19 A-M-A-HUUV MTR3-21/21 A-W-A-HUUV MTR3-23/23 A-W-A-HUUV
MTR3-25/25 A-W-A-HUUV MTR10-4/4 MTR10-10/10 MTR10-12/5 MTR10-22/22 MTR15-4/3
MTR15-5/2 MTR20-10/6 CRK2-260/26 A-W-A-AUUV MTR10-10/10 MTR10-8/3 MTR10-4/4
MTR10-14/3 MTR10-22/22
CR64-2CR64-3-2CR45-1-1CRCR64-3-1 45-1 CR45-2-2 CR45-2 CR45-3-2 CR45-3 CR45-4-2 CR45-4 CR45-5-2 CR45-5 CR45-6-2 CR45-6 CR45-7-2 CR45-7 CR45-8-2 CR45-8 CR45-9-2 CR45-9 CR45-10-2 CR45-10 CR45-11-2 CR45-11 CR45-12-2 CR45-12 CR45-13-2 CRN1S-2 CRN1S-3 CRN1S-4 CRN1S-5 CRN1S-6 CRN1S-7 CRN1S-8 CRN1S-9 CRN1S-10 CRN1S-11 CRN1S-12 CRN1S-13 CRN1S-15 CRN1S-17 CRN1S-19 CRN1S-21 CRN1S-23 CRN1S-25 CRN1S-27 CRN1S-30 CRN1S-33 CRN1S-36 CR95-1-1 CR95-1 CR95-2-2 CR95-2 CR95-3-2 CR95-3 CR95-4 CR95-5 CR95-6 CR95-7 CR95-8-2 DPK.15.80.37.0D CRI1-2 CRI1-3 CRI1-4 CRI1-5 CRI1-6 CRI1-7 CRI1-8 CRI1-9 CRI1-10 CRI1-11 CRI1-12 CRI1-13 CRI1-15 CRI1-17 CRI1-19 CRI1-21 CRI1-23 CRI1-25 CRI1-27 CRI1-30 CRI1-33 CRI1-36 CR3-2 CR3-17 CR32-1 CR32-2 CR32-3 CR32-4 CR32-5 CR32-6 CR32-7 CR32-8 CR32-9 CR32-10 CR32-11 CR32-12 CR32-13 CR32-14 SPK4-19/19 NBG100-65-200/190 MTS20-30 R38 DQ-T PIPE MTS20-50 R38-DQ-T PIPE MTR3-7/3 A-W-A-HUUV MTR3-17/17 A-W-A-HUUV MTR3-19/11 A-M-A-HUUV MTR3-19/19 A-M-A-HUUV MTR3-21/21 A-W-A-HUUV MTR3-23/23 A-W-A-HUUV MTR3-25/25 A-W-A-HUUV MTR10-4/4 MTR10-8/3 MTR10-10/10 MTR10-12/5 MTR10-14/3 MTR10-22/22 MTR15-4/3 MTR15-5/2 MTR15-6/5 A-W-A-HUUV MTR15-10/4 MTR15-12/12 NBG150-125-200/196 MTR3-30/30 A-W-A-HUUV MTR3-36/36 A-W-A-HUUV MTR3-33/33 SPK1-3/3 A-W-A-AUUV SPK1-5/5 SPK1-15/11 CRK2-260/26 A-W-A-AUUV MTR20-10/4 A-W-A-HUUV MTR20-10/6 CRK2-260/26 A-W-A-AUUV MTR10-4/4 MTR10-8/3 MTR10-10/10 MTR10-12/5 MTR10-14/3 MTR10-22/22 CM3-3
| Product type |
Booster pump |
| Use medium |
Hydraulic oil |
| Scope of application |
Industrial field |
| Material |
Cast steel |
| Post warranty service |
Video technical support, online support, spare parts |
Audited Supplier 
){kind=link}